Consumer Electronics Environmental Chamber Walk In
Product Description
Custom Walk - in Environmental Test Chamber for Tablets, Televisions, Speakers
1. Introduction
In the consumer electronics industry, tablets, televisions, and speakers play significant roles in our daily entertainment and communication needs. Ensuring their performance, durability, and reliability across diverse environmental conditions is of utmost importance for both manufacturers and consumers. Our Custom Walk - in Environmental Test Chamber is a tailor - made solution designed to meet the unique testing requirements of these devices. This large - scale chamber provides a controlled environment to simulate various real - world conditions, enabling comprehensive testing and quality assurance.
2. Key Features
2.1 Spacious and Adaptable Interior
The most notable feature of our walk - in environmental test chamber is its expansive and adaptable interior. With customizable dimensions, it can easily accommodate a wide variety of tablets, televisions, and speakers, from small portable tablets to large - screen smart TVs and towering speaker systems. The standard chamber sizes range from 6.5 cubic meters to 100 cubic meters, allowing for the testing of multiple units simultaneously or even large - scale product setups. This not only saves time but also enables manufacturers to conduct comparative tests and analyze the performance of different models under the same environmental conditions.
2.2 Precise Environmental Parameter Control
This chamber offers precise control over a broad spectrum of environmental parameters. Temperature can be adjusted from extremely cold (- 70°C) to very hot (150°C) with an astonishing accuracy of ± 0.3°C. This wide range is essential as tablets, televisions, and speakers may be used in various climates, from frigid polar regions to sweltering tropical areas. Humidity levels can be regulated between 10% and 90% relative humidity, mimicking different levels of moisture in the air. This comprehensive control over environmental factors ensures that the devices are tested under realistic and challenging scenarios.
2.3 Customizable Test Profiles
We understand that tablets, televisions, and speakers have distinct design features, functions, and target markets. Hence, our chamber allows for fully customizable test profiles. Manufacturers can program complex temperature and humidity cycles, dwell times, and transition rates to mimic real - world usage scenarios. For example, a test profile for a portable tablet designed for outdoor use might include rapid temperature changes to simulate sudden weather shifts, while a high - end home theater speaker system could be tested under more stable environmental conditions with occasional spikes in humidity. This flexibility ensures that each device is tested under the most relevant and accurate conditions, leading to more reliable and actionable test results.
2.4 Advanced Monitoring and Data Acquisition
The walk - in environmental test chamber is equipped with a state - of - the - art monitoring and data acquisition system. Multiple sensors are strategically placed throughout the chamber to continuously monitor temperature, humidity, air quality, and other environmental parameters. These sensors provide real - time data, which can be accessed and analyzed through an intuitive touch - screen control panel. Additionally, the system can interface with the devices being tested to collect performance data such as audio quality, video playback, battery life, and signal strength. This comprehensive data collection enables manufacturers to identify potential issues, analyze trends, and make informed decisions about product design and improvement.
2.5 Robust and Safe Construction
Built with high - quality, durable materials and advanced engineering techniques, the walk - in environmental test chamber is designed to withstand the rigors of continuous use. The exterior is constructed from a strong, fire - resistant alloy that can endure exposure to various chemicals and physical impacts. The internal components, including heating, cooling, and humidity control systems, are built to last and are regularly maintained to ensure consistent performance. Safety features such as emergency stop buttons, over - temperature protection, gas leakage detection, and fire suppression systems are in place to protect operators and the valuable devices being tested.
2.6 User - Friendly Interface
The chamber is equipped with a user - friendly interface that simplifies the testing process. The intuitive touch - screen control panel allows operators to easily set up test profiles, start and stop tests, and monitor real - time data. The interface also provides access to historical test data, enabling users to compare results from different tests and make informed decisions about product development. Additionally, the system can be integrated with other testing equipment and software, allowing for seamless data transfer and comprehensive analysis.
3. Specifications
Model
WIC-6
WIC-11
WIC-15
WIC-48
WIC-66
WIC-1000
Inside dimension(W x D x H) mm
200 x 220 x 150
250 x 220 x 200
350 x 220 x 200
500 x 240 x 400
500 x 240 x 400
100 x 100 x 100
Outside dimension(W x D x H) mm
280 x 260 x 180
350 x 260 x 230
455 x 260 x 230
610 x 280 x 430
680 x 280 x 530
155 x 190 x 160
Internal material
#304 Stainless Steel
External material
Powder coated #304 Stainless Steel
Temperature range
+ 150℃~ - 70 ℃
Humidity range
20% ~ 98% R. H
Temperature resolution ℃
0.01
Humidity resolution % R. H.
0.1
Temperature stability ℃
±0.5
Humidity stability % R. H.
±2
Heating time
30min
Cooling time
-40℃/50min, -20℃/30min
Air circulation system
Mechanical convection system
Cooling system
Sirocco Fan
Heating system
Sus316 Stainless steel Efficient heater
Humidification system
Steam Generator
Humidification water supply
Reservoir, Sensor-controller solenoid valve, recovery-recycle system
Controller
Touch panel
Electrical power requirements
Please contact us for requirements of specific models
Safety device
Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light
4. Benefits for Manufacturers
4.1 Enhanced Product Quality
Subjecting tablets, televisions, and speakers to comprehensive environmental testing in our walk - in chamber allows manufacturers to identify and address potential weaknesses in design, material selection, and manufacturing processes. By exposing the devices to a wide range of environmental conditions, manufacturers can detect issues such as overheating, color degradation, audio distortion, and connectivity problems. This enables them to make necessary design modifications and manufacturing improvements, resulting in higher - quality products that are more reliable and durable.
4.2 Cost Savings
Early detection of product issues through environmental testing can save manufacturers significant costs. By identifying and resolving problems before mass production, companies can avoid expensive rework, production delays, and potential product recalls. The ability to test multiple devices simultaneously in the large - capacity chamber also reduces testing time and costs, improving the overall efficiency of the product development process.
4.3 Meeting Market Demands
Consumers today expect tablets, televisions, and speakers to perform well in various environmental conditions. By using our custom walk - in environmental test chamber, manufacturers can ensure that their products meet these expectations. This not only improves customer satisfaction but also helps companies gain a competitive edge in the market. Products that can withstand extreme temperatures, high humidity, and other challenging environmental factors are more likely to be preferred by consumers.
4.4 Regulatory Compliance
There are numerous international and national regulations regarding the environmental performance of consumer electronics. Our walk - in environmental test chamber helps manufacturers ensure that their products comply with these regulations. By conducting thorough testing in accordance with relevant standards, manufacturers can demonstrate compliance and gain market access more easily.
5. Applications
5.1 Tablet Testing
Battery and Power Management: Test the battery life and charging efficiency of tablets under different temperature and humidity conditions. This helps manufacturers optimize battery performance and ensure that tablets can operate for extended periods in various environments.
Display and Touchscreen Performance: Evaluate the display quality, color accuracy, and touchscreen responsiveness of tablets in different lighting and temperature conditions. Extreme temperatures can affect the performance of the display and touchscreen, and testing can help identify and address these issues.
Connectivity and Wi - Fi Performance: Test the connectivity of tablets, including Wi - Fi, Bluetooth, and cellular networks, in different environmental settings. This ensures that tablets can maintain a stable connection even in areas with poor signal strength or high levels of interference.
5.2 Television Testing
Picture Quality and Color Accuracy: Test the picture quality, color accuracy, and contrast of televisions under different lighting and temperature conditions. This helps manufacturers ensure that televisions provide a high - quality viewing experience in various environments.
Heat Dissipation and Long - Term Reliability: Evaluate the heat dissipation capabilities of televisions to prevent overheating and ensure long - term reliability. The chamber can simulate different usage scenarios, such as continuous viewing for extended periods, to test the television's ability to handle heat.
Sound Quality and Speaker Performance: Test the sound quality and speaker performance of televisions in different acoustic environments. This helps manufacturers optimize the audio output of televisions and ensure that they provide a clear and immersive sound experience.
5.3 Speaker Testing
Sound Quality and Frequency Response: Test the sound quality, frequency response, and distortion levels of speakers under different temperature and humidity conditions. This helps manufacturers ensure that speakers produce high - quality audio in various environments.
Durability and Vibration Resistance: Evaluate the durability and vibration resistance of speakers to ensure that they can withstand normal use and transportation. The chamber can simulate vibrations and impacts to test the speaker's structural integrity.
Acoustic Performance in Different Spaces: Test the acoustic performance of speakers in different room sizes and shapes to ensure that they provide optimal sound distribution. This helps manufacturers design speakers that can adapt to different listening environments.
6. Conclusion
Our Custom Walk - in Environmental Test Chamber for tablets, televisions, and speakers is a cutting - edge solution that offers a comprehensive and reliable platform for testing the performance and durability of these devices. With its advanced features, precise environmental control, and user - friendly interface, it enables manufacturers to enhance product quality, reduce costs, meet market demands, and ensure regulatory compliance. Whether you are a manufacturer looking to improve your products or a quality control professional seeking accurate testing results, our chamber is the ideal choice. Contact us today to learn more about how our chamber can meet your specific testing needs.