Laboratory Continuous Programmable Salt Spray Test Chamber

Laboratory Corrosion Resistance Compound Salt Spray Test Chamber Price

Salt fog environment:

Continuous salt spray exposure is widely used to test corrosion resistance of components and coatings.Applications include industrial, maintenance, construction and Marine coatings;Plating and paint coating;Aviation and military coatings, surface and components, electrical and electronic systems and components.

Standard:

GB/T5170.8, GB/T10587, GJB150.11, GB/T10125, GB/T2423.17, etc.

Dry environment:

During the drying function, the dehumidification system is turned on, and the moisture in the box is discharged out of the box. At the same time, the fan works, so that the indoor air goes to the air heater and then enters the box, thus creating the low-humidity condition in the box.The temperature of the box is controlled by the box heater and air heater.The air heater is turned off for 5 seconds before the end of the drying process, so that the heater channel and the vicinity of components do not overheat due to the blower shutdown.

Humidity environment:

During the humidity function, the hot water in the humidifying tank boiler is evaporated into the tank to maintain the set humidity of the tank.

Condensed water environment:

During the condensation process, the water in the tank is heated through the tank heating tube at the bottom of the tank, so that the tank remains at about 100% relative humidity.

Parameters: