|Friction Speed:||Speed Can Adjustable (21/43/85/106) R/min||Friction Displacement:||60mm|
|Frequency Setting:||0-99999 Automatic Stop||Standards:||JIS-5071-1/TAPPI-UM486 TAPPI-UM487|
|Friction Load:||908g,1810g||Friction Area:||50*100mm|
1810g Ink abrasion tester,
60mm Ink Abrasion Test Machine,
40W Ink abrasion test apparatus
Printing Ink Cartridge Abrasion Testing Machine
1. use: Ink and print, color box wear resistance, decolorization degree test.
2. the principle:This machine judges the wear resistance and the degree of decolorization by rubbing between the measured material and the white wood forest paper.
The color printed product or finished product containing ink should be placed for 24 hours before testing. After cutting to a width of 60mm×210mm, it is fixed on the friction table, and the surface of the test article cannot afford to be unclean.
After removing the upper friction body, the length and width of the white doline paper of 50 mm×200 mm were taken and fixed on the upper friction body (on the black rubber body).
1. the sample to be tested is fixed on the lower friction table in four steps.Second, the upper part of the paper wrapped with white wood is rubbed and fixed on the transmission arm, and the weight is set again. Open the calculator box and set the number of frictions. The friction speed is (21/42/85/106 times/minutes adjustable).
2. press the 0N/OFF switch, the number of friction can be automatically shut down for a set number of times.
|Operation method||Microcomputer control, LCD display.|
|Test area||Size 60×210mm|
|Friction speed||4 kinds of speed adjustable (21/42/85/106c.p.m)|
|Friction load||4.5b (2.04kg) (20N)|
|Number of settings||0-9999 stops automatically.|
|Machine size||300×325×300cm W×D×H|
|Use voltage||AC 220V 50 60HZ 2A|